IN4701
11.3 Gbps TIA / LIA, 12 kΩ Differential Gain, w/ DCA & TWV (TO Can Padout)
Applications
- TO-can receivers
- SONET OC-192 and SDH STM-64 transponders
- Short, intermediate, long reach, and long haul optical receiver modules
- 10 Gbps Ethernet
- Broadband instrumentation
Features
- Supports data rates up to 11.3 Gbps
- Input sensitivity: -20 dBm
- Input overload: +2 dBm
- Fast rise and fall times: 15 ps
- Low power consumption: 105 mW
- Through-wafer vias on ground pads
- Adjustable DC offset control
- Single +3.3 V power supply
- Available in die form
- Small die size: 880 μm x 1100 μm
Description
The IN4701 transimpedance amplifier / limiting amplifier (TIA / LIA) is designed to support data rates up to 11.3 Gbps. It maintains an open eye with little duty cycle distortion for inputs up to +2 dBm. The IN4701 exhibits a typical input sensitivity of -20 dBm while maintaining a BER of 10–12 (assuming PD ρ = 0.9 A/W, data pattern is 231-1 PRBS at 11.3 Gbps).
With 12 kΩ of differential gain, the IN4701 eliminates the need for a stand-alone limiting amplifier to amplify signals from the TIA. The saturated output amplitude of the TIA / LIA is typically 450 mVpp differential. This part includes an integrated feedback circuit to control the decision threshold of the limiting amplifier, maintaining 50% eye crossing. In addition, the eye crossing can be externally adjusted through an offset pin, DCA.
To facilitate TO-can assembly, the IN4701 is small (880 μm x 1100 μm), with output pads on opposite sides of the die. Also, the backside of the TIA is grounded using through-wafer vias so that ground bonds are not required.
The IN4701 has fast rise and fall times and low power consumption. The TIA / LIA operates from a single +3.3 V power supply and is available in die form. Evaluation kits are available.
For more information about the IN4701 or other Inphi products, please click here and enter your email address for product downloads. New users, must first complete our product request form.

